Arc 3-points

A

Create an arc from three points (start-middle-end) \n (Right-Click to toggle Repeat Mode)

Array Copy

Alt+A

Array the selected geomery

Auto Zoom (Z)

Z

Zoom fit

Circle Centre-Radius

C

Create a circle from a Centre point and Radius \n (Right-Click to toggle Repeat Mode)

Close Path

Ctrl+Alt+C

Joining paths, having gap between ends less, then set tolerance

CommonLine

Ctrl+Alt+L

Configure Common Line Cutting for the cluster part

Copy

Ctrl+C

Copy an entity to the clipboard

Copy Selection

Alt+C

Copy the selection by selecting a base point and the point to copy to \n (Right-Click to toggle Repeat Mode)

Create Bevel Geometry

Ctrl+B

Creates additional path geometry for compound bevels

Create Construction Line

2

Create a construction line through 2 points

Create Construction Line Horizontal

H

Create a Horizontal construction line

Create Construction Line Vertical

V

Create a Vertical construction line

Cut

Ctrl+X

Delete an entity and place it on the clipboard

Delete

Del

Delete

Explode

Ctrl+E

Explode entity

Extend / Set Length

Ctrl+Alt+X

Extend entity

Fillet/Chamfer/Notch

Ctrl+Alt+F

Create a Fillet, Chamfer or Notch between two line segments

Harvest Line Item

Alt+H

Create new part from selected entities

Join

Ctrl+J

Join entities to path

Line

L

Create a line

Linear Dimension

D

Create a linear dimension

Measure (F2)

F2

Measure

Mirror Selection

Alt+M

Mirror the selection by selection a mirror line

Move Selection

M

Move the selection by selecting a base point and the point to move to

Offset Path

Ctrl+Alt+O

Offset paths (legacy function)

Dynamic Offset

Ctrl+O

Dynamic Offset of one or more paths

Ortho Mode

F8

Select orthogonal drawing mode

Paste

Ctrl+V

Paste an entity from the clipboard

Polyline

P

Create a polyline \n (Right-Click to toggle Repeat Mode)

Radial Copy

Ctrl+Alt+A

Radial Copy

Radial Dimension

R

Create a radial dimension \n (Right-Click to toggle Repeat Mode)

Redo

Ctrl+Y

For Parts, not Plates

Remove Leads and Loops

Shift+Ctrl+L

Removes leadins, leadouts and corner loops; useful after importing from G-Code

Reverse

Ctrl+R

Reverse entity

Rotate Selection (2pt)

Alt+R

Rotate the selection by selecting a rotation center point and a point (or angle) to rotate to

Rotate Selection (3pt)

Ctrl+Alt+R

Rotate the selection by selecting a rotation center point, a rotation base line point and the point to rotate to

Scale Selection (2pt)

Alt+S

Scale the selection by selecting a scale center point and the point to scale to

Scale Selection (3pt)

Ctrl+Alt+S

Scale the selection by selecting a scale center point, a scale base point and the point to scale to

Select Similar

Shift+Ctrl+A

Select similar entities

Set As External

Ctrl+Alt+E

Set the path as an external path

Set As Internal

Ctrl+Alt+I

Set the path as an internal path

Smooth

Ctrl+Alt+S

Smooth path

Split By Insect.

Ctrl+T

Split by intersection

Text

T

Create text defining the insert point \n (Right-Click to toggle Repeat Mode)

Undo                    

Ctrl+Z

For Parts, not Plates

Zoom In

Num +

Zoom in

Zoom Out

Num -

Zoom out