Quick quoting with Sketch Parts
<< Click to Display Table of Contents >> Navigation: Tutorials > Quotes Tutorials > Quick quoting with Sketch Parts |
Say a customer gives you a phone call, and wants a quick price on cutting 20, 300mm diameter roughly circular disks with 8, 10mm drilled holes, and 30, 125mm by 400mm roughly rectangular parts, all in 16mm GR250(A36). This tutorial shows you how to quickly estimate a cost for them.
1Open the Quotes mode.
2Click the New Quote button.
3Select the TutCustomer 1 customer.
4Click the Add Sketch Parts Item button .
5Set the Process to Kinetic Machine, Plasma (Best) and the material to GR250(A36) and Thickness to 16mm.
6Under the rectangle part type Width enter 125mm and under Height enter 400mm. Click Create Rectangle.
This window pops up.
7Under Qty/Name enter 30. Click Add as Item.
8Under the Diameter field enter 300mm
9Click Create Disk.
10Under Qty/Name enter 20. Click the pattern holes button . Enter the following details and Click OK.
11Click Add as Item.
12Click Done.
13Click Recalculate at bottom right.
Now you have a price to give your customer.
14Click Post
Because you have told the customer verbally, you should post this quote, so that it is official, and won't accidently be changed.
15Home