Copy Slot to Left

<< Click to Display Table of Contents >>

Navigation:  Tutorials > Geometry Tutorials > Part Geometry - Create a Slotted part >

Copy Slot to Left

Copy and rotate the top slot to the left position.  The top slot will first be copied and aligned with the left point of the hexagon.  It will then rotated by 90° and moved into position using offset coordinates

1Select the top slot

2Click the Copy Selection tool 948

3Select the center of the top arc as the base point of the copy

949

4Select the left point of the hexagon as the Copy To point

955

5Select the Rotate Selection (2pt) tool

3308

6Select the center of the top arc as the base point of the rotation

7Set the rotation angle to 90 degrees

Press the A key, Enter 90;

Press the ENTER key.

957

8Select the Move Selection tool 945

9Select the center of the left arc as the base point of the move

10Set the Move To point to (d15, d0)mm / (d0.6, d0)"

Press the X then D key, Enter 15mm / 0.6";

Press the Y then D key, Enter 0;

Press the ENTER key.

3030