Move Slot

<< Click to Display Table of Contents >>

Navigation:  Tutorials > Geometry Tutorials > Part Geometry - Create a Slotted part >

Move Slot

Move the slot to the bottom-center position.  The center of the bottom arc will be moved to an absolute coordinate.

1Select the slot

2Ensure the Snap to Centre snap is on. snap centre

3Click the Move Selection tool. 945

4Select the center of the bottom arc as the base point of the move:

946

5Set the Move To point to (25, 15)

Press the X key, Enter 25mm / 1";

Press the Y key, Enter 15mm / 0.6";

Press the ENTER key.

3028